900-SUB-5
PCB Tab Connector
Tab 2.8 mm
BESCHREIBUNG
The tab connector 900-SUB-5 with double solder termination and a pitch of 5 mm is designed for 2,8 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. Insulation receptacles ISO-110 (see also ISO product data sheet) can be used to insulate 2,8 mm tab receptacles. Insulation sockets are available for 6,3 mm tab connectors with double-spring contacts (see also ISO-900 product data sheet).
ALLGEMEINE DATEN
Raster: 5.00 mm
Polzahlen: 2 - 25
TECHNISCHE DATEN
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
320 V
320 V
630 V
Bemessungsstoßspannung
4 kV
4 kV
4 kV
Bemessungsstrom: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)
Bemessungsisolationsspannung: 450 V acc. to EN 60998-1
Bohrung in der Leiterplatte: ø 1.6 mm
Andere Spezifikationen: Indicated rated voltages refer to applications with insulation receptacles
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
150 | 15 | B | ||
|
6 | 300 | B, D, E |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, red, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Lötstift: 1.0 x 0.8 mm; tin plated brass
Registerkarte: 2.8 x 0.8 mm; tin plated brass
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Insulation receptacles ISO
- Insulation sockets ISO-900
- Change of pitch
- Component mix of tab connector versions
- Tab connectors are also individually available (see single tabs GST-900)
