110-A-115
Plug Connector
Screw connection. with connecting flanges
DESCRIPTION
The plug connector 110-A-115 with connecting flanges with a pitch of 3.5 mm is available in 2- to 22-pole design. For its small dimensions it offers remarkable connection data (1.5 mm² / 160 V-III-3 / 8 A). The high-quality elevator system guarantees reliable connection of all conductor types. The connecting flanges on both housing sides are equipped with M2.5 (<0.3 Nm) screws.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 28 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 8 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.2 Nm
RATINGS
Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
---|---|---|---|---|---|
| 8 | 300 | B, D | 30 - 16 | 0.2 |
| 8 | 300 | B | 30 - 16 | 0.2 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA. grey. V-0
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Pressure clamp: Nickel plated brass
Screw: M2; tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking based on the sketch provided
- Self-Adhesive marking strip BST-3.50
- Pitch of 7 mm for larger clearance and creepage distances
- Strain relief