141-C-111
PCB Connector
Screw connection, 45° wire entry, dovetail version
DESCRIPTION
The PCB connector 141-C-111 is the inclined version with lift system with a pitch of 5,08 mm and available in 2 and 3 pole design. The wire entrance is diagonal, i.e. in a 45° angle to the PC board. Therefore, this PCB connector is ideal for the assembly in the center of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Lateral latching elements on the housing allow to lock the PCB connector to longer terminal rows without pole loss. The screws are captive.
GENERAL INFORMATION
Pitch: 5.08 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
200 V
320 V
500 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 16 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 [1] | 300 | B, D | 30 - 14 | 0.51 |
|
15 | 300 | B | 30 - 14 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Tin plated tin bronze
Screw: M3; zinc plated steel, blue passivated
Solder pin: 0,9 x 0,5 mm; tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,08
- Pitch of 10,16 mm for larger clearance and creepage distances
- Connected to larger number of poles
