140-E-111
PCB Connector
Screw connection, dovetail version, tall version
DESCRIPTION
The PCB connector 140-E-111, tall version with lift system with a pitch of 5 mm, is available with 2 or 3 poles. Due to the raised design, the clamping space projects over e.g. parts or housing edges in front. This PCB connector can also be used for encapsulating circuits. Lateral latching elements on the housing allow to lock the 2- or 3-pole PCB connector to connectors of any pole number without pole loss. The wire entrance is parallel to the PCB. The screws are captive.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 14 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 [1] | 300 | B | 30 - 14 | 0.51 |
|
15 | 150 | B | 30 - 14 | 0.51 |
| 10 | 300 | D | 30 - 14 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
Solder pin: 0,9 x 0,5 mm; Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Can be fitted together to larger pole numbers
