953 (-DS)

PCB Connector

Screw connection, vertical wire entry

https://wecoconnectors.com/wp-content/uploads/Images/953-R.JPG

DESCRIPTION

PCB connector 953 is the horizontal version of 952 and with a pitch of 10 mm available in 2- to 16-pole design. It is a very space saving PCB connector. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is vertical to the PCB. The screws are secured against self-loosening.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 16

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

with wire protector:

0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

630 V (500 V)

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 17.5 A

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.4 Nm

Other specifications: Rated voltage in brackets applies to 5-16-pole connectors, “no-flame” according to glow wire test applies to 2-4-pole connectors.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B 26 - 14 0.4
10 300 D 26 - 14 0.4
15 300 B 26 - 14 0.4
10 300 D, E 26 - 14 0.4
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
17.5 750 1.5
Download PDF

TECHNICAL DRAWINGS

953.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-4 poles: CTI ≥ 600; 5-16 poles: CTI 400

Insulating group: 2-4 poles: I; 5-16 poles: II

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2,6; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • Self-Adhesive marking strip BST-10.00
  • Different pin lengths

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 953/02 12.871.083 953-DS/02 22.871.083 15.00
03 953/03 12.871.085 953-DS/03 22.871.085 25.00
04 953/04 12.871.022 953-DS/04 22.871.022 35.00
05 953/05 12.871.019 953-DS/05 22.871.019 45.00
06 953/06 12.871.021 953-DS/06 22.871.021 55.00
07 953/07 12.871.023 953-DS/07 22.871.023 65.00
08 953/08 12.871.025 953-DS/08 22.871.025 75.00
09 953/09 12.871.027 953-DS/09 22.871.027 85.00
10 953/10 12.871.029 953-DS/10 22.871.029 95.00
11 953/11 12.871.031 953-DS/11 22.871.031 105.00
12 953/12 12.871.039 953-DS/12 22.871.039 115.00
13 953/13 12.871.041 953-DS/13 22.871.041 125.00
14 953/14 12.871.037 953-DS/14 22.871.037 135.00
15 953/15 12.871.089 953-DS/15 22.871.089 145.00
16 953/16 12.871.091 953-DS/16 22.871.091 155.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.