982-ML-2.8
Screw/Solder Connector Block
With soldering tabs
DESCRIPTION
Screw/solder connector block 982-ML-2,8 in 9,52 mm pitch is available in 2- to 12-pole design and can be mounted side-by-side in nominal pitch. This connector is based on our series 982 terminal strip. The lead connection is designed as head contact terminal with M3,5 screws. Screws and square washers are movably connected. The square washers are mounted in a non-twist arrangement. For an easier connection of the lead, the washer automatically moves up when the screw is loosened. One solder tag (width 2,8 mm) per pole is located on the soldering side.
GENERAL INFORMATION
Pitch: 9.52 mm
No. of poles: 2 - 12
Application: Wall bushings
TECHNICAL DATA
Clamping Range:
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG
Rated cross section: 2.5 mm² [1]
Wire stripping length: 8.5 mm
Over Voltage Category
III
Pollution Severity Level
3
Rated Voltage
320 V
Rated Impulse Voltage
4 kV
Rated current: 17.5 A (wire 1.5 mm² at soldering tag)
Rated insulation voltage: 450 V acc. to EN 60998-1
Torque: 0.8 Nm
Other specifications: Per pole two wires of identical cross-section can be connected.
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
20 | 300 | B | 20 - 12 | 0.79 |
![]() |
20 | 300 | B | 20 - 12 | 0.79 |
10 | 300 | D,E | 20 - 12 | 0.79 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3,5; zinc plated steel, blue passivated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip
- G05: Gold Plating (5 micro inches)
- Insulation receptacles ISO
- Cover caps
- Crosshead screws on request
- Tab versions available instead of screw connections
- Bushing and mounting bases are available upon request