830-A-111-SMD
PCB Connector for SMD
Push-In connection
DESCRIPTION
The PCB terminal block 830-A-111-SMD with the pitch of 3,5 mm offers strong performance in the smallest space. The position of the entries in parallel to the printed circuit board enables the advantageous application within housings with external connection. Due to the very small space requirement and the white colour it is ideally suited to various applications in the lighting industry. The front of the terminal is equipped with pushers to be handled with standard screwdrivers for the removal of the parallel connected conductors. The easy to use spring system allows beside the use of 1 mm² solid wires also the connection of 0,75 mm² flexible by use of the pushers. The advanced design of this high temperature resistant terminal allows in the area of the solder pins the free circulation of hot air in the convection oven during the reflow soldering process. The standard packaging in Tape-on-Reel makes this terminal very suitable for its automatic pick & place in the production line.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 + 3
Application: Lighting technology, devices
TECHNICAL DATA
Clamping Range:
0.2 - 1.0 mm² / 0.2 - 0.75 mm² / 24 - 18 AWG
Rated cross section: 1 mm² (starr / solid) / 0.75 mm²
Wire stripping length: 7.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 13.5 A apply to 1 mm² solid9 A apply to 0.75 mm²
Soldering Process: Reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
6 | 300 | B | 24 - 18 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, white, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Terminal body: Tin plated copper alloy
Spring: Stainless steel
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Black colour on request