110-M-221-THR
Header
Vertical plug-in
DESCRIPTION
The 110-M-221-THR is a pin strip, suitable for the reflow soldering process, in vertical design with a pitch of 3,5 mm and available from 2 to 12 poles. It is compatible to all standard plugs of the series 110 as well as to the Insulation Displacement Connector 110-A-IDC. The housing of the pin strips correspond to the requirements of the increased soldering temperatures in the lead free soldering process. Spacers, so-called stand-offs, ensure a better hot-air circulation during the reflow soldering process in the convection oven and allow an improved visual control of the solder joint. All THR pin strips of this series are packed Tape-on-Reel for the assembling with pick & place machines. They are equipped with high temperature resistant Pick Caps (see picture), which can be comfortably removed after the soldering process.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 12
Usable with: plugs with 110-A-111 series
Additional information: Version with connecting flanges see also 110-M-225-THR
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 8 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
8 | 300 | B, D | ||
![]() |
8 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Solder pin: 0,8 x 0,8 mm; tin plated brass
Tab: Nickel plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50 [1]
- Coding elements 120-K-HT-WS