120-A-115
Plug Connector
Screw connection, with anchors
DESCRIPTION
The plug connector 120-A-115, with connecting flanges and a pitch of 5 mm, is available in 2- to 22-pole design. Right-hand and left-hand connecting flanges are equipped with M2.5 screws which can be screwed onto plug connectors and the corresponding series 120 pin strips. For each pole, the plug connector has one trapezoidal coding slot in which the coding elements 120-K can be inserted. The wire entrance is parallel to the plug direction. The screws are captive.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 12 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.5 Nm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
15 | 300 | B | 26 - 12 | 0.51 |
10 | 300 | D | 26 - 12 | 0.51 | |
![]() |
15 | 300 | B | 26 - 12 | 0.51 |
10 | 300 | D, E | 26 - 12 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Pressure clamp: Tin plated tin bronze
Screw: M3; zinc plated steel, blue passivated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Coding elements 120-K
- Connectors equipped with coding elements on request
- Version with extended wire entrance