210-A-111
PCB Connector
Screw connection
DESCRIPTION
Series 210 is a space-saving PCB connector with a pitch of 3,5 mm and with relatively high connection capacity. The 2 to 24 pole connectors are equipped with M2 captive screws offering high-quality screw connection with elevator system. Connectors with such elevator system are ideal for repeated disconnections because terminal body and conductor move parallel towards the pressure clamp. The elevator system allows easy disconnecting and contacting of the connector. A special feature of the housing is the easy identification of the pole separation, when viewed from the top. The connectors come equipped with a test hole and can be mounted side-by-side without pole loss.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 24
Application: For all applications requiring low profile but large terminal space of 1,7 x 2,6 mm.
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 30 - 16 AWG
Rated cross section: 1 mm²
Wire stripping length: 5.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 12.5 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.2 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B | 30 - 16 | 0.23 |
|
10 | 300 | B | 30 - 16 | 0.22 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI 400
Insulating group: II
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M2; copper alloy, tin plated
Solder pin: Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Version with anti-twist-peg
