302-NFLP-DS
Eurostyle Terminal Strip
Screw connection & socket with clamping spring, low profile version, vertical plug-in, two screw guides of same height
DESCRIPTION
The plug-in terminal strip 302-NFLP-DS, low version, is available in 8 mm pitch with 2 to 12 poles. It has one screw connection per pole and one vertical plug connection to a terminal strip with pins. Contact spring and wire protector form one unit. The wire protection reliably prevents damage to flexible wires by the turning screw. The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum contact protection. The plug-in terminal strip 302-NSLP creates a plug connection where both terminal strips are located on top of each other and therefore require little mounting space. The leads remain in parallel position. This arrangement does not allow for the connection of an earth lead. These terminals strips can be screw-mounted on a substrate.
GENERAL INFORMATION
Pitch: 8.00 mm
No. of poles: 2 - 12
Usable with: 302-NSLP(-HDS)
Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
200 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Rated values apply to use in combination with 302-NSLP(-HDS) and without insulated substrates.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B,D,E | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Screw: M2,6; zinc plated steel, blue passivated_x000D_
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Marking options on the screw guides
- Jumper 302-J
