323-FB (-HDS)
Plug-In Terminal Strip
Screw connection & socket with clamping spring
DESCRIPTION
The plug-in terminal strip 323-FB is available in 10 mm pitch with 2 to 12 poles. It has one screw connection per pole and one plug connection for a terminal strip with pins. When using 322-SV plug-in terminal strips, the contact pressure is applied by a stainless-steel spring. The plugging direction is parallel to each other. The wire protector of the “HDS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. These terminals strips can be screw-mounted on a substrate.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 12
Usable with: 322-SV(-DS)
Application: Applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
400 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 15 A
Rated insulation voltage: 450 V acc. to EN 60998-1 [1]
Torque: 0.5 Nm
Other specifications: Rated values apply to use in combination with 322-SV(-DS) and insulated substrates.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 18 - 12 | 0.51 |
|
15 | 300 | B | 26 - 10 | 0.51 [1] |
| 10 | 300 | D,E | 26 - 10 | 0.51 [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Stainless steel strip
Screw: M3; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Marking options on the screw guides
- Jumper 323-J
- G05: Gold Plating (5 micro inches)
