982-SMF-2.8 /-4,8

Barrier Strip Connector

Screw connection, with solder pin and tab

https://wecoconnectors.com/wp-content/uploads/Images/982-SMF-2.8-R.JPG

DESCRIPTION

The PCB connectors 982-SMF-2,8 and 982-SMF-4,8 with a pitch of 9.52 mm are available in 1- to 12-pole design and can be mounted side-by-side in the nominal pitch. They are based on our series 982 terminal strips. The conductor terminal is of head contact design with Screws M3.5, whereby the screws and square washers are movably connected. For easier connection, the non-rotably mounted square washers are automatically lifted when the screw is loosened. On the solder side and the plug-in side they feature one solder pin and one tab connection of 2.8 mm or 4.8 mm width per pole. This allows current to flow to other components without having to use additional conductor paths.

GENERAL INFORMATION

Pitch: 9.52 mm

No. of poles: 1 - 12

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 8.5 mm

Over Voltage Category

III

Pollution Severity Level

3

Rated Voltage

320 V

Rated Impulse Voltage

4 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 4.8; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 450 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Torque: 0.8 Nm

Other specifications: Screw-fixing holes ø 3,2 mm. Per pole two wires of identical cross-section can be connected. Indicated rated voltage applies to applications with insulation receptacles.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 20 - 12 0.79
6 300 B, D, E 20 - 12 0.79 [1]
15 300 B 20 - 12 0.79 [2]
Download PDF

TECHNICAL DRAWINGS

982-SMF-2.8.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Pressure clamp: Tin plated brass

Screw: M3,5; zinc plated steel, blue passivated

Solder pin: 0,8 x 1,0 mm; tin plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • G05: Gold Plating (5 micro inches) 
  • Cover cap 982-A
  • Securing pins BEF-983
  • Fastening pole position can be freely selected
  • Various versions of tabs instead of screw connections

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
01 982-SMF-2.8/01 91.873.703 982-SMF-4.8/01 92.873.703 28.56
02 982-SMF-2.8/02 91.873.704 982-SMF-4.8/02 92.873.704 38.08
03 982-SMF-2.8/03 91.873.705 982-SMF-4.8/03 92.873.705 47.60
04 982-SMF-2.8/04 91.873.706 982-SMF-4.8/04 92.873.706 57.12
05 982-SMF-2.8/05 91.873.707 982-SMF-4.8/05 92.873.707 66.64
06 982-SMF-2.8/06 91.873.708 982-SMF-4.8/06 92.873.708 76.16
07 982-SMF-2.8/07 91.873.709 982-SMF-4.8/07 92.873.709 85.68
08 982-SMF-2.8/08 91.873.710 982-SMF-4.8/08 92.873.710 95.20
09 982-SMF-2.8/09 91.873.711 982-SMF-4.8/09 92.873.711 104.72
10 982-SMF-2.8/10 91.873.712 982-SMF-4.8/10 92.873.712 114.24
11 982-SMF-2.8/11 91.873.713 982-SMF-4.8/11 92.873.713 123.76
12 982-SMF-2.8/12 91.873.714 982-SMF-4.8/12 92.873.714 133.28

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.