910-Y (-DS)
PCB Tab Connector
Screw connection, 2 solder pins per pole
DESCRIPTION
The series 910-Y PCB connector in 10 mm pitch with two solder pins per pole is designed for particularly large wires.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 4 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 25 A
Hole in PCB: ø 1.8 mm
Torque: 0.8 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
25 | 300 | B | 18 - 10 | 0.79 |
|
25 | 300 | B | 22-10 [1] | 0.79 |
| 10 | 300 | D, E | 22-10 [1] | 0.79 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
32 | 750 | 4.0 [2] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI 400
Insulating group: II
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3,5; zinc plated steel, blue passivated
Solder pin: 1,0 x 1,2 mm; tin plated brass
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
