120-M-227
Header
Vertical plug-in, with screw locking
DESCRIPTION
The pin strip 120-M-227, with connecting flanges and a pitch of 5 mm, is available in 2- to 12-pole design and can be mounted side-by-side. By means of the lh and rh connecting flanges, this pin strip can be mounted on a PCB with M2x14 and M2 nuts, self-tapping screws or rivets without any additional soldering. The plug direction for mating pin strips is parallel to the PCB. For each pole, the pin strip has one trapezoidal coding slot in which the coding elements 120-K can be inserted.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 12 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.4 mm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | ||
| 10 | 300 | D | |||
|
15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 1,0 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- Self-Adhesive marking strip BST-5.00
- Coding keys 120-K
- Version with 10 mm spacing (120-M-228)
- Different pin lengths
- M2x14 screw and M2 nut
