401-LFPA-4.8 /-6.3
Insulated Tab Terminal Strip
DESCRIPTION
The combined tab/solder connector blocks are used primarily as connectors, cable splitter or as a base in electrical appliances and in automotive. In the -LF version of the Type 401 a solder connection is located on the opposite side of the flat plug. The solder tags protrude approximately 8,5 mm from the housing. On the solder tag a flat plug sleeve B 2.8 x 0.8 can be inserted. Depending on the application, this type is available with flat connectors 4,8 mm or 6,3 mm width in 1 to 12 pole design. The insulation on the plug side can be done with our insulating ISO 187 on the tab 4,8 mm and ISO 110 with the solder joints. The tab connectors are suitable for flat plugs according to DIN 46247.
GENERAL INFORMATION
Pitch: 12.00 mm
No. of poles: 1 - 12
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
400 V
630 V
1000V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 16 A: with receptacle 4.8; wire 2.5 mm² (14 AWG)25 A: with receptacle 6.3; wire 6.0 mm² (10 AWG)
Rated insulation voltage: 450 V acc. to EN 60998-1
Other specifications: Rated values apply to use in combination with insulated substrates.
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
15 | 300 | B | max. 10 | [1][2] |
![]() |
15 | 300 | B | max. 10 | [1] |
15 | 150 | C | max. 10 | [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Tab: Tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Types with two tabs 2,8 and solder tongue on the other side
- Other tab connectors variants available upon request, e.g. for the transition from 4.8 to 6.3
- Other tab connector variants available upon request, e.g. for the transition from 4.8 to 6.3