876 (-DR)
PCB Connector
Screwless connection, 45° angled wire entry
DESCRIPTION
The PCB connectors 876 und 876-DR with Push-In connection and a pitch of 7,5 mm, are available with 2 to 10 poles. They provide easy connection of solid and stranded conductors and feature a stainless steel spring clamp which ensures safe permanent contact. The spring clamp of version 876 is operated by pressing a pusher inside the housing with a screwdriver whereas the spring clamp of version 876-DR is manually operated by a protruding lever. The wire entrance is in a 45° angle to the PC board. Each pole has a double solder termination with 10 mm pin spacing.
GENERAL INFORMATION
Pitch: 7.50 mm
No. of poles: 2 - 10
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 10 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 10 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B | 22 - 16 | |
|
10 | 300 | B, D, E | 22 - 16 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, red V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Spring: Stainless strip steel
Solder pin: 0,6 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-7,50
- Other pitch
- Connected to larger number of poles
