982-F
Tab/Screw Connector Block
with tabs 4.8 or screw connection
DESCRIPTION
Tab/screw connector block 982-F in 9,52 mm pitch is based on our proven 98.. series (see Catalogue 4 “Pitch 7,5 mm”). It features a 4.8 mm tab connector in star-shaped arrangement and is available in 2- to 24-pole design for a maximum of six tab connectors or alternatively one screw connector per pole. The compartments on both extremities of the block can serve either for mounting on a substrate or for fastening our 982-A/983-A cover caps. Upon request, other compartments can remain empty for mounting purposes. Installation note: Since the bottom is not closed, the connector should be mounted on an isolating substrate/surface. Alternatively, our marking strip BST-983-F can be used for this purpose. Due to the large variety of different types, listing numbers and prices of the various articles is not possible. When inquiring or ordering products with uniform assembly, stating the number of poles and the assembly number is sufficient. For mixed assemblies, we require an exemplary scheme including the orientation of asymmetrical assemblies, stating the number of desired poles and the assembly of each pole with assembly number.
GENERAL INFORMATION
Pitch: 9.52 mm
No. of poles: 2 - 24
TECHNICAL DATA
Clamping Range:
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG
Rated cross section: 2.5 mm² [1]
Wire stripping length: 8.5 mm
Over Voltage Category
III
Pollution Severity Level
3
Rated Voltage
320 V
Rated Impulse Voltage
4 kV
Rated current: 16 A: with receptacle 4.8; wire 2.5 mm² (14 AWG)
Rated insulation voltage: 450 V acc. to EN 60998-1
Torque: 0.8 Nm
Other specifications: For screw connectors, two leads of identical cross-section can be connected per pole.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 20 - 12 | 0.79 |
|
15 | 300 | B | 20 - 12 | 0.79 |
| 10 | 300 | D,E | 20 - 12 | 0.79 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Screw: M3,5; zinc plated steel, blue passivated
Tab: Nickel plated brass
OPTIONS / ACCESSORIES
- Consecutive Numbering
- Version for printed circuits (with solder connection), see type 983-FS/-FD
- Crosshead screws
- Fastening pole position can be freely selected
Notes
STANDARD CONFIGURATIONS
| Poles | Items | Part # | Length L [mm] | Step | 3D PDF |
|---|
