941 (-DS)
PCB Connector
Screw connection, vertical wire entry
DESCRIPTION
The PCB connector 941 is the horizontal version of 940 with a pitch of 5,08 mm and available in 2- to 32-pole design. It can be mounted side-by-side without pole loss. The wire entrance is vertical to the PCB. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.
GENERAL INFORMATION
Pitch: 5.08 mm
No. of poles: 2 - 32
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V (250 V)
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 17.5 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.4 Nm
Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types: "no-flame" acc. to glow-wire test.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | 26 - 14 | 0.4 |
|
15 | 300 | B | 26 - 14 | 0.4 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
17.5 | 250 | 1.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 250
Insulating group: 2-8 poles: I; 9-32 poles: IIIa
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2,6; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated brass
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,08
