302-FBG
Plug-In Terminal Strip
Socket with clamping spring, with solder pin
DESCRIPTION
The plug-in terminal strip 302-FBG is equipped with a solder pin and designed for the use on PCBs. Due to the small 8 mm pitch, this design is well suited for applications where space is limited. Used in combination with a plug-in terminal strip 302-SV, the contact pressure is applied by a stainless-steel spring. In plugged condition, all metal components are protected against accidental contact, except for the solder pins. The screws are captive, vibration-proof and secured against self-loosening. In addition, the terminal strips can be screw-mounted onto the PCB.
GENERAL INFORMATION
TECHNICAL DATA
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 6 A
Rated insulation voltage: 450 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Other specifications: Rated values apply to use in combination with 302-SV(-DS).
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
7 | 300 | B,D | 20 - 14 | |
|
10 | 300 | B,D,E | 26-12 [1] |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, white, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Stainless steel strip
Solder pin: Ø 1 mm; tin plated copper
OPTIONS / ACCESSORIES
- Marking strips BST-302
- Longer solder pins up to 75 mm
