950-LH (-DS)
PCB Connector
Screw connection, with angled solder pin, pottable
DESCRIPTION
The 950-LH series PCB screw connector with a pitch of 5 mm features an angled solder pin and is particularly suited for potting printed circuits. For such potting applications, the solder pin is sealed at the housing opening against seeping casting resin. This PCB screw connector with a pitch of 5 mm is available in 2- to 12-pole design and can be mounted side-by-side without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The wire entrance is parallel to the PCB whereas the casting resin surface is vertical to the wire entrance. Version 951-LH alternatively provides wire entrance vertical to the PCB.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 17.5 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.4 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | 26 - 14 | 0.4 |
|
15 | 300 | B | 26 - 14 | 0.4 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
17.5 | 250 | 1.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2.6; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distance
- Other solder pin length and bending positions on request
