951-A-LFDS
Screw/Solder Terminal Strip
Screw/solder tag connection
DESCRIPTION
The screw/solder terminal strip 951-A-LFDS with a pitch of 5 mm is available in 2- to 12-pole design. It requires only little mounting space and is well suited for low-voltage applications. The solder tag is formed as a wire protector. The wire protection reliably prevents damage to multi-wire flexible conductors by the turning screw. The moulding can also be mounted using the lateral flanges.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
TECHNICAL DATA
Clamping Range:
0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.4 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | 26 - 14 | 0.4 |
|
300 | 15 | B | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Screw: M2.6; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- G30: Gold Plating (30 micro inches)
