158-A-211
PCB connector
Screw connection, tall version, extended wire entrance
GENERAL INFORMATION
Pitch: 10.16 mm
No. of poles: 2 - 12
Usable with: 158-A-111, 159-A-111 and 159-A-211, mountable side-by-side to any series connector
Application: Power electronics, in particular for drives with frequency converters, and also for power supplies and charging units.
TECHNICAL DATA
Clamping Range:
0.5 - 16 mm² / 0.5 - 10 mm² / 20 - 6 AWG
Rated cross section: 10 mm²
Wire stripping length: 10.5 mm ± 1 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
800 V
1000 V
1000 V
Rated Impulse Voltage
8 kV
8 kV
6 kV
Rated current: 57 A
Hole in PCB: ø 1.5 mm
Torque: 1.2 Nm
Other specifications: Maximum current/cross-section 76 A / 16 mm², stranded wire
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
300 | 60 | D | 20 - 6 | 1.3 |
| 10 | D | 20 - 6 | 1.3 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
57 | 800 - 1000 [1] | 2.5 - 10 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Tin plated copper
Screw: Plus-minus, M4; zinc plated steel, blue passivated
Solder pin: Tin plated copper
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,16
