950-GFL-DS
Plug Connector
Screw connection, with solder pin
DESCRIPTION
Application example - thermostat housing: The plug connectors are soldered in the basic housing and their leads are wired externally. Subsequently, the control panel, equipped with corresponding pin strips, is slotted in from above and then connected.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.34 - 2.5 mm² / 0.34 - 2.5 mm² / 22 - 14 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V (200 V)
320 V
630 V (400 V)
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Voltage data in brackets are valid for 13-24 poles types. 2-12 pole types are "no-flame" acc. to glow-wire test.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B | 26 - 14 | 0.4 |
|
300 | 10 | B | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-12 poles: CTI ≥ 600; 13-24 poles: CTI 400
Insulating group: 2-12 poles: I; 13-24 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Screw: M2.6; zinc plated steel, blue passivated
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
