968-T (-DS)

PCB Connector

Screw connection, enlarged clamping area, dovetail version

https://wecoconnectors.com/wp-content/uploads/Images/968-T-R.JPG

DESCRIPTION

The PCB connector 968-T with a pitch of 5,08 mm is available in 2- and 3 poles and can be mounted side-by-side without pole loss. Compared to the PCB connector 960-T, it has a larger conductor space for wires up to 6 mm². Lateral latching elements on the housing allow to latch the PCB connector to longer terminal strips without pole loss. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

Pitch: 5.08 mm

No. of poles: 2 + 3

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 6 mm² / 0.75 - 4 mm² / 18 - 10 AWG

with wire protector:

0.34 - 6 mm² / 0.34 - 4 mm² / 22 - 10 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]		 Voltage
[V]		 Group
 		 AWG
 		 Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]		 Voltage
[V]		 Cross Section
[mm2]		 AWG
 		 TORQUE
 
24 400 4.0
Download PDF

TECHNICAL DRAWINGS

968-T.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • BS: Copper alloy (brass) screw
  • WG: Wire Guide
  • Self-Adhesive marking strip BST-5.08
  • Different pin lengths

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 968-T/02 30.878.602 968-T-DS/02 40.878.602 10.16
03 968-T/03 30.878.603 968-T-DS/03 40.878.603 15.24

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.