983-UW
Barrier Strip Connector
Screw connection, vertical wire entry, with back barrier
DESCRIPTION
The PCB connector 983-UW with a pitch of 10 mm is a version with framed ribs to realize larger clearance and creepage distances. For wave soldering corresponding slots are necessary in the printed circuit board.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 7
Additional information: with plus/minus screw. cross recess: Pozidriv
TECHNICAL DATA
Clamping Range:
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 8.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
800 V
1000 V
1000 V
Rated Impulse Voltage
8 kV
8 kV
6 kV
Rated current: 15 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Torque: 1.2 Nm
Other specifications: Per pole two wires of identical cross-section can be connected.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 600 | B, C | 20 - 12 | 1.13 |
|
600 | 20 | B, C | 20 - 12 | 1.13 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; temporary max. 260°C (15-30 sec)
Pressure clamp: Tin plated brass
Screw: M4; zinc plated steel, blue passivated
Solder pin: 0,8 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
