983-SML-2.8
Barrier Strip Connector
Screw connection, with solder pin and solder tag
BESCHREIBUNG
The PCB connector 983-SML-2,8 with a pitch of 10 mm is available in 1- to 12-pole design and can be mounted side-by-side in the nominal pitch. They are based on our series 983 terminal strips. The conductor terminal is of head contact design with screws M4, whereby the screws and square washers are movably connected. For easier connection, the non-rotably mounted square washers are automatically lifted when the screw is loosened. On the solder side and the plug-in side they feature one solder pin and one soldering tag of 2.8 mm width per pole. This allows current to flow to other components without having to use additional conductor paths.
ALLGEMEINE DATEN
Raster: 10.00 mm
Polzahlen: 1 - 12
TECHNISCHE DATEN
Klemmbereich:
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG
Nennquerschnitt: 2.5 mm²
Abisolierlänge: 8.5 mm
Überspannungskategorie
III
Verschmutzungsgrad
3
Bemessungsspannung
320 V
Bemessungsstoßspannung
4 kV
Bemessungsstrom: 17.5 A (wire 1.5 mm² in soldering tag area)
Bemessungsisolationsspannung: 450 V acc. to EN 60998-1
Bohrung in der Leiterplatte: ø 1.6 mm
Drehmoment: 1.2 Nm
Andere Spezifikationen: Fixing holes ø 3,2 mm. Per pole two wires of identical cross-section can be connected.
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 20 - 12 | 1.13 |
|
20 | 300 | B | 20 - 12 | 1.13 |
| 10 | 300 | D, E | 20 - 12 | 1.13 |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Anschlussbügel: Tin plated brass
Schraube: M4; zinc plated steel, blue passivated
Lötstift: 0,8 x 1,0 mm; tin plated brass
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Securing pins BEF-983
- Fastening pole position can be freely selected
- Crosshead screws
- Various tab versions available instead of screw connections
