978-Y (-DS)

PCB Connector

Screw connection, 2 solder pins per pole, enlarged clamping area

https://wecoconnectors.com/wp-content/uploads/Images/978-Y-R.JPG

BESCHREIBUNG

The PCB connector 978-Y with larger conductor space and a pitch of 5 mm is available in 2- to 32-pole design. Equipped with two solder pins per pole, these PCB connectors offer a tighter fit on the PCB, particularly at smaller pole numbers, and also feature higher non-twist reliability when connecting the terminal lead. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. The wire entrance is parallel to the PCB. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

ALLGEMEINE DATEN

Raster: 5.00 mm

Polzahlen: 2 - 32

TECHNISCHE DATEN

Spannbereich:

starr / flexibel / AWG

ohne Drahtschutz

0.75 - 6 mm² / 0.75 - 4 mm² / 18 - 10 AWG

mit Drahtschutz:

0.34 - 6 mm² / 0.34 - 4 mm² / 22 - 10 AWG

Nennquerschnitt: 2.5 mm²

Abisolierlänge: 6.5 mm ± 0.5 mm

Überspannungskategorie

III

III

II

Verschmutzungsgrad

3

2

2

Bemessungsspannung

250 V (200 V)

320 V

630 V (400 V)

Bemessungsstoßspannung

4 kV

4 kV

4 kV

Bemessungsstrom: 24 A

Bohrung in der Leiterplatte: ø 1.3 mm

Drehmoment: 0.5 Nm

Andere Spezifikationen: Rated voltage in parentheses apply to 9-32-pole connectors, “no-flame” according to glow wire test applies to 2-8-pole connectors.

ZULASSUNGEN

Strom
[A]		 Spannung
[V]		 Gruppe
 		 AWG
 		 Drehmoment
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Aktuell
[A]		 Spannung
[V]		 Querschnitt
[mm2]		 AWG
 		 DREHMOMENT
 
24 400 4.0
PDF herunterladen

TECHNISCHE ZEICHNUNGEN

978-Y.JPG - technical drawing 1

MATERIALDATEN

Gehäusematerial: PA, grey, V-0

Kriechstromfestigkeit: 2-8 poles: CTI ≥ 600; 9-2 poles: CTI 400

Isolierstoffgruppe: 2-8 poles: I; 9- 32 poles: II

Temperaturgrenzen: -40°C up to 100°C

Klemmkörper: Tin plated brass

Schraube: M3; zinc plated steel, blue passivated

Lötstift: ø 1 mm; tin plated copper

Drahtschutz: Tin plated tin bronze

SONDERAUSFÜHRUNG / ZUBEHÖR

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Longer solder pins up to 95 mm
  • Version with extended wire entrance
  • Double wire protector as bridge
  • With test holes, see 970-MP

Anmerkungen

AUSFÜHRUNGEN

Pole Artikel Artikelnummer # Artikel Artikelnummer # Länge L [mm] Step 3D PDF
02 978-Y/02 30.872.802 978-Y-DS/02 11.00
04 978-Y/04 30.872.804 978-Y-DS/04 21.00
05 978-Y/05 30.872.805 978-Y-DS/05 26.00
06 978-Y/06 30.872.806 978-Y-DS/06 31.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.