900-SH-5
PCB Tab Connector
Tab 2x 2.8 mm
BESCHREIBUNG
The tab connector 900-SH-5 with double solder termination and a pitch of 5 mm is designed for 2x 2,8 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. On tab connectors of this series, two non-insulated 2,8 mm tab receptacles can be plugged in parallel. Insulation receptacles ISO-110 (see also ISO product data sheet) can be used to insulate 2,8 mm tab receptacles.
ALLGEMEINE DATEN
Raster: 5.00 mm
Polzahlen: 2 - 25
TECHNISCHE DATEN
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
320 V
320 V
630 V
Bemessungsstoßspannung
4 kV
4 kV
4 kV
Bemessungsstrom: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)
Bemessungsisolationsspannung: 450 V acc. to EN 60998-1
Bohrung in der Leiterplatte: ø 1.6 mm
Andere Spezifikationen: Indicated rated voltages refer to applications with insulation receptacles
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
15 | 150 | B | ||
|
15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, red, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Lötstift: 1.0 x 0.8 mm; tin plated brass
Registerkarte: 2.8 x 0.8 mm; tin plated brass
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Insulation receptacles ISO
- Change of pitch
- Component mix of tab connector versions
- Tab connectors are also individually available (see single tabs GST-900)
