130-P
Plug Connector
Screw connection, card edge connector
BESCHREIBUNG
The plug connector 130-P series was designed particularly for direct contacting with the PCB. Accurate positioning can be achieved by versions with single- or double-sided closed walls or by additional coding keys between the poles serving as centre polarizing. For this purpose, the PCB must be equipped with slots in the corresponding positions. Coding by means of the RAST 5 plug-connection system is possible using a coding frame, which is not included in our delivery extent (see also 130-A). The technical drawing shows an example of a 2-, 3- and 4-pole version, uncoded with the corresponding article designations. The corresponding article numbers are listed below. Other coded versions (P,K,V) are available upon request.
ALLGEMEINE DATEN
TECHNISCHE DATEN
Klemmbereich:
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 14 AWG
Nennquerschnitt: 2.5 mm²
Abisolierlänge: 7 mm ± 0.5 mm
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
160 V
160 V
320 V
Bemessungsstoßspannung
2.5 kV
2.5 kV
2.5 kV
Bemessungsstrom: 6 A
Bemessungsisolationsspannung: 130 V acc. to EN 60998-1
Drehmoment: 0.5 Nm
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
16 | B | 26 - 12 | 0.51 | |
| 10 | D | 26 - 12 | 0.51 | ||
|
300 | 15 | B, D, E | 26 - 14 | 0.51 |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: CTI ≥ 600
Isolierstoffgruppe: I
Temperaturgrenzen: -40°C up to 100°C
Klemmkörper: Nickel plated brass
Feder: Tin plated tin bronze
Anschlussbügel: Tin plated tin bronze
Schraube: M3; zinc plated steel, blue passivated
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Closed side wall, on one or both sides
- Coding elements 130-CP
- Version with extended wire entrance
