130-P

Plug Connector

Screw connection, card edge connector

https://wecoconnectors.com/wp-content/uploads/Images/130-P-R.JPG

DESCRIPTION

The plug connector 130-P series was designed particularly for direct contacting with the PCB. Accurate positioning can be achieved by versions with single- or double-sided closed walls or by additional coding keys between the poles serving as centre polarizing. For this purpose, the PCB must be equipped with slots in the corresponding positions. Coding by means of the RAST 5 plug-connection system is possible using a coding frame, which is not included in our delivery extent (see also 130-A). The technical drawing shows an example of a 2-, 3- and 4-pole version, uncoded with the corresponding article designations. The corresponding article numbers are listed below. Other coded versions (P,K,V) are available upon request.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

Usable with: PC Boards

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 14 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 7 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 6 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
16 B 26 - 12 0.51
10 D 26 - 12 0.51
300 15 B, D, E 26 - 14 0.51
Download PDF

TECHNICAL DRAWINGS

130-P.JPG - technical drawing 1
https://wecoconnectors.com/wp-content/uploads/Images/130-P-LPL.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Spring: Tin plated tin bronze

Pressure clamp: Tin plated tin bronze

Screw: M3; zinc plated steel, blue passivated

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Pitch of 10 mm for larger clearance and creepage distances
  • Closed side wall, on one or both sides
  • Coding elements 130-CP
  • Version with extended wire entrance

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 130-P/02 20.802.220 10.00
03 130-P/03 20.802.230 15.00
04 130-P/04 20.802.240 20.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.