971-FB
Socket Terminal Strip
Plug connection, vertical plug-in
BESCHREIBUNG
The socket terminal strip 971-FB with a pitch of 5 mm is available with 2 to 32 poles. In order to achieve a higher housing strength, these socket terminal strips cannot be mounted side-by-side without pole loss. It is suitable for a parallel connection of two PCBs, when using male pin strips of the series 971-SLR, -SLS oder -SLW. For this version, the plug direction for mating connectors is vertical to the PCB. The contact pressure is achieved by means of a stainless steel spring with extra-long spring deflection. Due to the high spring forces, it is advisable to select the socket terminal strip with only up to 8 poles. For longer clearance and creepage distances, socket terminal strips are also available in a larger pitch. The socket terminal strip 971-FB only differs from the smaller 951-FB version by the M3 screws and longer clearance and creepage distances. It is fully compatible to versions 951-SV, 97..-FBW and -FBS.
ALLGEMEINE DATEN
TECHNISCHE DATEN
Überspannungskategorie
III
III
II
Verschmutzungsgrad
3
2
2
Bemessungsspannung
250 V
320 V
630 V (500 V)
Bemessungsstoßspannung
4 kV
4 kV
4 kV
Bemessungsstrom: 6 A
Bohrung in der Leiterplatte: ø 1.3 mm
Andere Spezifikationen: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types are "no-flame" acc. to glow-wire test.
ZULASSUNGEN
|
Strom [A] |
Spannung [V] |
Gruppe |
AWG |
Drehmoment [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | ||
| 10 | 300 | D | |||
|
20 | 300 | B | ||
| 10 | 300 | D, E |
| Aktuell [A] |
Spannung [V] |
Querschnitt [mm2] |
AWG |
DREHMOMENT |
|
|---|---|---|---|---|---|
|
17.5 | 250 [1] |
TECHNISCHE ZEICHNUNGEN
MATERIALDATEN
Gehäusematerial: PA, grey, V-0
Kriechstromfestigkeit: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 400
Isolierstoffgruppe: 2-8 poles: I; 9-32 poles: II
Temperaturgrenzen: -40°C up to 100°C
Klemmkörper: Tin plated brass
Feder: Stainless strip steel
Lötstift: ø 1 mm; tin plated brass
SONDERAUSFÜHRUNG / ZUBEHÖR
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Other solder pin lengths on request
- Version with lateral latching elements
