110-AP-211

Plug Connector

Screw connection, direct contact to PCB

https://wecoconnectors.com/wp-content/uploads/Images/110-AP-211-R.JPG

DESCRIPTION

The plug connector 110-AP-211 as direct connection to PC boards with a pitch of 3,5 mm is available in 2- to 12-pole design. Due to the small pitch, the plug connector is particularly suitable for confined spaces. The high-quality elevator system guarantees reliable connection of all conductor types. Slots corresponding with the housing side walls or the PC board width determine the correct plug connector position on the conductor paths. The board design determines whether the contacting is single- or double-sided. Slots between the plug connections not only to increase the creepage distances in the housing but also serve as receptacle for coding keys.

GENERAL INFORMATION

Pitch: 3.50 mm

No. of poles: 2 - 12

Application: Telecommunication technology, house telephones, intercoms

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 30 - 16 AWG

Rated cross section: 1 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 3 A for one side PCB contact6 A for two side PCB contact

Rated insulation voltage: 130 V acc. to EN 60998-1

PCB Thickness: 1.4 - 1.8 mm

Torque: 0.2 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
7 150 B 30 - 16 0.23
Download PDF

TECHNICAL DRAWINGS

110-AP-211.JPG - technical drawing 1
https://wecoconnectors.com/wp-content/uploads/Images/110-AP-211-LPL.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Screw: M2; copper alloy, tin plated

Contact Element: Copper alloy, tin plated

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-3,50
  • Coding keys 110-AP, Part-No.: 10.496.028
  • Factory-assembled coding keys on request

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 110-AP-211/02 10.842.072 7,00
03 110-AP-211/03 10.842.073 10,50
04 110-AP-211/04 10.842.074 14,00
05 110-AP-211/05 10.842.075 17,50
06 110-AP-211/06 10.842.076 21,00
07 110-AP-211/07 10.842.077 24,50
08 110-AP-211/08 10.842.078 28,00
09 110-AP-211/09 10.842.079 31,50
10 110-AP-211/10 10.842.080 35,00
11 110-AP-211/11 10.842.081 38,50
12 110-AP-211/12 10.842.082 42,00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.