120-F-211

Plug Connector

Screwless connection, with release feature

120-F-211-R.jpg

DESCRIPTION

The plug connector 120-F-211 series with screwless terminals and a pitch of 5 mm complements our “CONECTA”-Series. The rated cross-section of 2,5 mm² is geared towards screw-connector variants. This plug connector can be used with single-core copper conductors and fine-stranded wires (2,5 mm²), but also with pin cable sockets or crimped ferrules. For crimped ferrules the cross-section must be reduced accordingly. All other rated data is identical with the screw-connector variants. Test ports for ø 2 mm or ø 2,3 mm test plugs or for spring test pins are accessible from the top of the clamp. The plug connector consists of individual poles and can be manufactured to any required pole configuration at our factory. For each pole the plug connector has one trapezoidal coding groove in which the coding elements 120-K can be inserted. The plug connector is operated by the built-in pusher.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 12

Usable with: plugs with 120-M-111, 121, 211, 221 series

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.2 - 4 mm² / 0.2 - 2.5 mm² / 24 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 8.5 mm ± 0.5 mm

Over Voltage Category

II

Pollution Severity Level

2

Rated Voltage

320 V

Rated Impulse Voltage

2.5 kV

Rated current: 12 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Download PDF

TECHNICAL DRAWINGS

120-F-211.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Spring: Copper alloy, tin plated

Pressure clamp: Copper alloy, tin plated

Contact spring: Stainless steel

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00
  • Coding elements 120-K
  • Connectors equipped with coding elements on request
  • Strain relief

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 120-F-211/02 12.808.905 10.00
03 120-F-211/03 13.808.905 15.00
04 120-F-211/04 14.808.905 20.00
05 120-F-211/05 15.808.905 25.00
06 120-F-211/06 16.808.905 30.00
07 120-F-211/07 17.808.905 35.00
08 120-F-211/08 18.808.905 40.00
09 120-F-211/09 19.808.905 45.00
10 120-F-211/10 20.808.905 50.00
11 120-F-211/11 21.808.905 55.00
12 120-F-211/12 22.808.905 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.