141-A-111

PCB Connector

Screw connection, dovetail version

https://wecoconnectors.com/wp-content/uploads/Images/141-A-111-R.JPG

DESCRIPTION

The PCB connector 141-A-111 with lift system is designed as one-tier basic version with a pitch of 5,08 mm and available in 2 and 3 pole design. Lateral latching elements on the housing allow to latch the PCB connector to longer terminal rows without pole loss. The wire entrance is parallel to the PCB. The screws are captive.

GENERAL INFORMATION

Pitch: 5.08 mm

No. of poles: 2 + 3

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

200 V

320 V

500 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 16 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.2 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 [1] 300 B, D 30 - 14 0.51
15 300 B 30 - 14 0.51
Download PDF

TECHNICAL DRAWINGS

141-A-111.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Pressure clamp: Tin plated tin bronze

Screw: M3; zinc plated steel, blue passivated

Solder pin: 0,9 x 0,5 mm; tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,08
  • Pitch of 10,16 mm for larger clearance and creepage distances

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 141-A-111/02 10.801.302 10.16
03 141-A-111/03 10.801.303 15.24

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.