302-SV (-DS)

Plug-In Terminal Strip

Screw connection & pin

https://wecoconnectors.com/wp-content/uploads/Images/302-SV-R.JPG

DESCRIPTION

The plug-in terminal strip 302-SV is available in 8 mm pitch with 1 to 12 poles. It has one screw connection per pole and one vertical pin for the connection to the socket of the female counterpart. In combination with the plug-in terminal strip 302-FB, this connector provides the contact pressure via a stainless steel spring which ensures good electrical contact. Plug-in direction is parallel to each other. In combination with the plug-in terminal strip 302-FBG, this connector can be used especially on a printed circuit board. Plug-in terminal strips 302-SV or 302-SVG create a plug connection where the connection leads are located in a 90° angle to each other. That way, challenges of limited mounting space can be resolved. Due to the small 8 mm pitch, this version is well suited for applications where space is limited. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. These terminals strips can be screw-mounted on a substrate.

GENERAL INFORMATION

Pitch: 8.00 mm

No. of poles: 2 - 12

Usable with: 302-FB(-DS), 302-FBG, 302-FLW-DS

Application: Applications that require to easily open and close not energised circuits.

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.5 - 4 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG

with wire protector:

0.34 - 2.5 mm² / 0.34 - 1.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 6 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Torque: 0.4 Nm

Other specifications: Rated values apply to use in combination with 302-FB(-DS) and without insulated substrates.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
6 B,C,D 20 - 14 0.4 [2]
300 10 B,D,E 26 - 12 0.4 [1][2]
Download PDF

TECHNICAL DRAWINGS

302-SV.JPG - technical drawing 1

MATERIALS

Moulding: PA, natural, V-2

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2,6; zinc plated steel, blue passivated

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Marking options on the screw guides
  • Jumper 302-J
  • Moulding made of special polyamide for e.g. household appliances

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 302-SV/02 60.820.029 302-SV-DS/02 48.820.029 15.00
03 302-SV/03 61.820.029 302-SV-DS/03 49.820.029 23.00
04 302-SV/04 62.820.029 302-SV-DS/04 50.820.029 31.00
05 302-SV/05 63.820.029 302-SV-DS/05 51.820.029 39.00
06 302-SV/06 64.820.029 302-SV-DS/06 52.820.029 47.00
07 302-SV/07 65.820.029 302-SV-DS/07 53.820.029 55.00
08 302-SV/08 66.820.029 302-SV-DS/08 54.820.029 63.00
09 302-SV/09 67.820.029 302-SV-DS/09 55.820.029 71.00
10 302-SV/10 68.820.029 302-SV-DS/10 56.820.029 79.00
11 302-SV/11 69.820.029 302-SV-DS/11 57.820.029 87.00
12 302-SV/12 70.820.029 302-SV-DS/12 58.820.029 94.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.