930-THR (-DS)
PCB Connector for THR
Screw connection
DESCRIPTION
This product based on our established 930 series have been designed for the soldering process in Through-Hole-Reflow technology. The soldering paste is applied to the plated through holes and the pins are placed in the circuit board and soldered by a reflow oven. The terminal mouldings are made of heat-resistant material. The stand-offs on the base ensures there is enough room for the soldering paste and facilitates good heat circulation for optimum soldering and enables the soldering joint to be visually inspected. The solder pin projects very slightly with a circuit board thickness of 1,6 mm and creates a solder point on both sides and thus guarantees a secure mounting. The position of the solder pins enables an equally minimal allocation area on the circuit board as with wave soldering.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 12, 15
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 13.5 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.2 Nm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
![]() |
10 | 300 | B | 26 - 16 | 0.23 |
![]() |
300 | 10 | B | 26 - 16 | 0.2 |
TECHNICAL DRAWINGS
PCB Layout
![930-THR - technical drawing 2](https://wecoconnectors.com/wp-content/uploads/2019/10/930-THR-LPL.jpg)
PCB Layout
![930-THR - technical drawing 2](https://wecoconnectors.com/wp-content/uploads/2019/10/930-THR-LPL.jpg)
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Terminal body: Tin plated brass
Screw: M2; zinc plated steel, blue passivated
Solder pin: ø 0,9 mm; tin plated brass
Wire protector: German silver
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50 [1]
- Other solder pin lengths on request
- Large conductor space with terminal body 938 on request