930-THR (-DS)

PCB Connector for THR

Screw connection

https://wecoconnectors.com/wp-content/uploads/Images/930-THR-R.JPG

DESCRIPTION

This product based on our established 930 series have been designed for the soldering process in Through-Hole-Reflow technology. The soldering paste is applied to the plated through holes and the pins are placed in the circuit board and soldered by a reflow oven. The terminal mouldings are made of heat-resistant material. The stand-offs on the base ensures there is enough room for the soldering paste and facilitates good heat circulation for optimum soldering and enables the soldering joint to be visually inspected. The solder pin projects very slightly with a circuit board thickness of 1,6 mm and creates a solder point on both sides and thus guarantees a secure mounting. The position of the solder pins enables an equally minimal allocation area on the circuit board as with wave soldering.

GENERAL INFORMATION

Pitch: 3.50 mm

No. of poles: 2 - 12, 15

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 1.5 mm² / 0.75 - 1.5 mm² / 18 - 16 AWG

with wire protector:

0.34 - 1.5 mm² / 0.34 - 1 mm² / 22 - 16 AWG

Rated cross section: 1 mm²

Wire stripping length: 5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 13.5 A

Soldering Process: Wave solder & reflow solder

Rated insulation voltage: 130 V acc. to EN 60998-1

Hole in PCB: ø 1.2 mm

Torque: 0.2 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 300 B 26 - 16 0.23
300 10 B 26 - 16 0.2
Download PDF

TECHNICAL DRAWINGS

930-THR.JPG - technical drawing 1

PCB Layout

930-THR - technical drawing 2
https://wecoconnectors.com/wp-content/uploads/Images/930-THR-LPL.JPG - technical drawing 1

PCB Layout

930-THR - technical drawing 2

MATERIALS

Moulding: PA HT, black, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1

Terminal body: Tin plated brass

Screw: M2; zinc plated steel, blue passivated

Solder pin: ø 0,9 mm; tin plated brass

Wire protector: German silver

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-3,50 [1]
  • Other solder pin lengths on request
  • Large conductor space with terminal body 938 on request

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 930-THR/02 10.879.002 930-THR-DS/02 20.879.002 7.40
03 930-THR/03 10.879.003 930-THR-DS/03 20.879.003 10.90
04 930-THR/04 10.879.004 930-THR-DS/04 20.879.004 14.40
05 930-THR/05 10.879.005 930-THR-DS/05 20.879.005 17.90
06 930-THR/06 10.879.006 930-THR-DS/06 20.879.006 21.40
15 930-THR/15 10.879.015 930-THR-DS/15 20.879.015 52.90

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.