931-FST
PCB Tab Connector
DESCRIPTION
The tab connector 931-FST with tabs 2,8 x 0,8 mm can be used both with plug connector 930-FL or 938-FLDS and to connect individual wires with tab receptacles B 2.8-DIN 46 247 whose crimped points must be insulated. The tab connector is inserted in the plug connector 930-FL in direction of the wire entrance, which minimizes the space requirements on the PC board compared to the combination with pin strip 931-SLS or 931-SLR. The receptacles are not parts of our production program.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 16
Usable with: plug-in connectors of 930-FL and 938-FLDS series; receptacle B 2.8
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
250 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.8 mm
Other specifications: Rated voltage with insulated receptacles
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
6 | 300 | B | ||
|
6 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI 250
Insulating group: IIIa
Temperature range: -40°C up to 100°C
Solder pin: 1.4 x 0.8 mm; tin plated brass
Tab: 2.8 x 0.8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Pitch of 7 mm for larger clearance and creepage distances
