931-FST

PCB Tab Connector

https://wecoconnectors.com/wp-content/uploads/Images/931-FST-R.JPG

DESCRIPTION

The tab connector 931-FST with tabs 2,8 x 0,8 mm can be used both with plug connector 930-FL or 938-FLDS and to connect individual wires with tab receptacles B 2.8-DIN 46 247 whose crimped points must be insulated. The tab connector is inserted in the plug connector 930-FL in direction of the wire entrance, which minimizes the space requirements on the PC board compared to the combination with pin strip 931-SLS or 931-SLR. The receptacles are not parts of our production program.

GENERAL INFORMATION

Pitch: 3.50 mm

No. of poles: 2 - 16

Usable with: plug-in connectors of 930-FL and 938-FLDS series; receptacle B 2.8

TECHNICAL DATA

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

250 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)

Rated insulation voltage: 130 V acc. to EN 60998-1

Hole in PCB: ø 1.8 mm

Other specifications: Rated voltage with insulated receptacles

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
6 300 B
6 300 B
Download PDF How to Order

TECHNICAL DRAWINGS

931-FST.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI 250

Insulating group: IIIa

Temperature range: -40°C up to 100°C

Solder pin: 1.4 x 0.8 mm; tin plated brass

Tab: 2.8 x 0.8 mm; tin plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-3,50
  • Pitch of 7 mm for larger clearance and creepage distances

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 931-FST/02 12.893.705 7.00
03 931-FST/03 13.893.705 10.50
04 931-FST/04 14.893.705 14.00
05 931-FST/05 15.893.705 17.50
06 931-FST/06 16.893.705 21.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.