130-P
Plug Connector
Screw connection, card edge connector
DESCRIPTION
The plug connector 130-P series was designed particularly for direct contacting with the PCB. Accurate positioning can be achieved by versions with single- or double-sided closed walls or by additional coding keys between the poles serving as centre polarizing. For this purpose, the PCB must be equipped with slots in the corresponding positions. Coding by means of the RAST 5 plug-connection system is possible using a coding frame, which is not included in our delivery extent (see also 130-A). The technical drawing shows an example of a 2-, 3- and 4-pole version, uncoded with the corresponding article designations. The corresponding article numbers are listed below. Other coded versions (P,K,V) are available upon request.
GENERAL INFORMATION
TECHNICAL DATA
Clamping Range:
0.2 - 4 mm² / 0.2 - 2.5 mm² / 26 - 14 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
16 | B | 26 - 12 | 0.51 | |
| 10 | D | 26 - 12 | 0.51 | ||
|
300 | 15 | B, D, E | 26 - 14 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Pressure clamp: Tin plated tin bronze
Screw: M3; zinc plated steel, blue passivated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Closed side wall, on one or both sides
- Coding elements 130-CP
- Version with extended wire entrance
