302-NFLW-DS
Eurostyle Terminal Strip
Screw connection & socket with clamping spring, low profile version
DESCRIPTION
The plug-in terminal strip 302-NFLW-DS, low version, is available in 8 mm pitch with 2 to 12 poles. It has one screw connection per pole and one vertical plug connection to a terminal strip with pins. Contact spring and wire protector form one unit and offers good connection performance for applications requiring small plugging and pulling forces and low contact resistance. The wire protection reliably prevents damage to flexible wires by the turning screw. The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum contact protection. The “N”-variant only differs from the standard 302-FLW-DS version by the 12 mm overall height (i.e. the moulding height is 3 mm lower). This allows for a more compact angular plug connection to the 302-NSV terminal strip. Note the shortened clearance and creepage distances. Plug-in terminal strip 302-NSLW creates a plug connection with wire entrances located parallel on top of each other which requires relatively little mounting space. That is why tensile forces on the wires have no direct effect on the contact performance. This arrangement does not allow for the connection of an earth lead.
GENERAL INFORMATION
Pitch: 8.00 mm
No. of poles: 2 - 12
Usable with: 302-NSV(-DS), 302-NSLW(-HDS)
Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.
TECHNICAL DATA
Clamping Range:
0.75 - 2.5 mm² / 0.75 - 1.5 mm² / 18 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 6 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Torque: 0.4 Nm
Other specifications: Rated values apply to use in combination with 302-NSLW(-HDS).
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 | 300 | B,D | 22 - 14 | 0.4 |
|
10 | 300 | B,D,E | 26 - 14 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, natural, V-2
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Tin plated tin bronze
Screw: M2,6; zinc plated steel, blue passivated_x000D_
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Marking options on the screw guides
- Jumper 302-J
