302-NFLW-DS

Eurostyle Terminal Strip

Screw connection & socket with clamping spring, low profile version

https://wecoconnectors.com/wp-content/uploads/Images/302-NFLW-DS-R.JPG

DESCRIPTION

The plug-in terminal strip 302-NFLW-DS, low version, is available in 8 mm pitch with 2 to 12 poles. It has one screw connection per pole and one vertical plug connection to a terminal strip with pins. Contact spring and wire protector form one unit and offers good connection performance for applications requiring small plugging and pulling forces and low contact resistance. The wire protection reliably prevents damage to flexible wires by the turning screw. The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum contact protection. The “N”-variant only differs from the standard 302-FLW-DS version by the 12 mm overall height (i.e. the moulding height is 3 mm lower). This allows for a more compact angular plug connection to the 302-NSV terminal strip. Note the shortened clearance and creepage distances. Plug-in terminal strip 302-NSLW creates a plug connection with wire entrances located parallel on top of each other which requires relatively little mounting space. That is why tensile forces on the wires have no direct effect on the contact performance. This arrangement does not allow for the connection of an earth lead.

GENERAL INFORMATION

Pitch: 8.00 mm

No. of poles: 2 - 12

Usable with: 302-NSV(-DS), 302-NSLW(-HDS)

Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.75 - 2.5 mm² / 0.75 - 1.5 mm² / 18 - 16 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 7 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 6 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.4 Nm

Other specifications: Rated values apply to use in combination with 302-NSLW(-HDS).

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 300 B,D 22 - 14 0.4
10 300 B,D,E 26 - 14 0.4
Download PDF

TECHNICAL DRAWINGS

302-NFLW-DS.JPG - technical drawing 1

MATERIALS

Moulding: PA, natural, V-2

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Spring: Tin plated tin bronze

Screw: M2,6; zinc plated steel, blue passivated_x000D_

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Marking options on the screw guides
  • Jumper 302-J

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 302-NFLW-DS/02 32.820.038 15.00
03 302-NFLW-DS/03 33.820.038 23.00
04 302-NFLW-DS/04 34.820.038 31.00
05 302-NFLW-DS/05 35.820.038 39.00
06 302-NFLW-DS/06 36.820.038 47.00
07 302-NFLW-DS/07 37.820.038 55.00
08 302-NFLW-DS/08 38.820.038 63.00
09 302-NFLW-DS/09 39.820.038 71.00
10 302-NFLW-DS/10 40.820.038 79.00
11 302-NFLW-DS/11 41.820.038 87.00
12 302-NFLW-DS/12 42.820.038 94.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.