971-SLR-THR-1.1
Pin Strip for THR
ø 1.1 mm pin strip
DESCRIPTION
971-SLR-THR-1.1 is a pin strip with a pitch of 5,0 mm for the application in a reflow soldering process. The high temperature resistant plastic housing has a very high CTI value and is equipped with spacers, so-called "Stand-offs", which ensure a better hot-air circulation during the reflow soldering process in the convection oven. Beyond this, they assure an improved optical control of the solder joints. The pin strip 971-SLR-THR-1,1 comes with a constant pin ø of 1,1 mm in the mating and solder area. We recommend this pin strip for higher numbers of poles, in order to minimize the plug-in and withdrawal forces here. For the automatic assembling all pin strips of this series are packed in Tape-on-Reel and equipped with high temperature resistant Pick Caps, which can easily be removed after the soldering process.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 12
Usable with: plugs with 115-F-.../..-1,1-SW; 950-FL-DS, TFL-DS, NAF-DS, GFL-DS, NLFL-DS, RFL-DS series
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 10 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 [1] | 300 | B | ||
|
10 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Solder pin: ø 1.1 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- TR: Tape and Reel Assembly (Includes pick surface)
- Other solder pin surfaces on request
