979 (-DS)

PCB Connector

Screw connection, enlarged clamping area

https://wecoconnectors.com/wp-content/uploads/Images/979-R.JPG

DESCRIPTION

The PCB connector 979 with a pitch of 10 mm is available in 2- to 16-pole design. Compared to the PCB connector 972, it has a larger conductor space for wires up to 6 mm² and has also large clearance and creepage distances. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 16

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 6 mm² / 0.75 - 4 mm² / 18 - 10 AWG

with wire protector:

0.34 - 6 mm² / 0.34 - 4 mm² / 22 - 10 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

630 V (500 V)

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 24 A

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

Other specifications: Rated voltage in brackets applies to 5-16-pole connectors, “no-flame” according to glow wire test applies to 2-4-pole connectors.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 750 4.0
Download PDF

TECHNICAL DRAWINGS

979.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-4 poles: CTI ≥ 600; 5-16 poles: CTI 400

Insulating group: 2-4 poles: I; 5-16 poles: II

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Longer solder pins up to 95 mm
  • Version with extended wire entrance
  • With test holes, compare 970-MP, 970-TMP

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 979/02 32.872.003 979-DS/02 42.872.003 16.00
03 979/03 32.872.005 979-DS/03 42.872.005 26.00
04 979/04 32.872.007 979-DS/04 42.872.007 36.00
05 979/05 32.872.009 979-DS/05 42.872.009 46.00
06 979/06 32.872.011 979-DS/06 42.872.011 56.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.