970-TX (-DS)
PCB Connector
Screw connection, 2 to 4 screw common connection, dovetail version
DESCRIPTION
The PCB screw connector 970-TX with a „pitch” of 5 mm has 2 to 4 screw connections at only one pole and can be used e.g. as potential distributors. This allows to loop through earth conductors easily. Lateral latching elements allow to latch this type of screw connector to terminal strips of any length. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. A not latchable version with 2 to 12 screw connections at one pole is available as type 970-X.. NOTE: The pole numbers indicated in the article number do not designate the actual number of poles but the number of screw connections instead!
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 1
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 22-12 [1] | 0.51 |
| 10 | 300 | D | 22-12 [1] | 0.51 | |
|
20 | 300 | B | 26 - 12 | 0.51 |
| 10 | 300 | D, E | 26 - 12 | 0.51 |
| Current [A] |
Voltage [V] |
Cross Section [mm2] |
AWG |
TORQUE |
|
|---|---|---|---|---|---|
|
24 | 400 | 2.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- CN: Consecutive Numbering
- SM: Special Marking (please provide sketch)
- G05: Gold Plating (5 micro inches)
- G30: Gold Plating (30 micro inches)
- S30: Silver Plating (30 micro inches)
- Self-Adhesive marking strip BST-5.00
- Can be snapped together to larger pole version
- Different pin lengths
- Version with 10 mm spacing
