970-TX (-DS)

PCB Connector

Screw connection, 2 to 4 screw common connection, dovetail version

https://wecoconnectors.com/wp-content/uploads/Images/970-TX-R.JPG

DESCRIPTION

The PCB screw connector 970-TX with a „pitch” of 5 mm has 2 to 4 screw connections at only one pole and can be used e.g. as potential distributors. This allows to loop through earth conductors easily. Lateral latching elements allow to latch this type of screw connector to terminal strips of any length. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. A not latchable version with 2 to 12 screw connections at one pole is available as type 970-X.. NOTE: The pole numbers indicated in the article number do not designate the actual number of poles but the number of screw connections instead!

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 1

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 6.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF How to Order

TECHNICAL DRAWINGS

970-TX.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated copper

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • Self-Adhesive marking strip BST-5.00
  • Can be snapped together to larger pole version
  • Different pin lengths
  • Version with 10 mm spacing

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 970-TX/02 10.872.619 970-TX-DS/02 20.872.619 10.00
03 970-TX/03 10.872.620 970-TX-DS/03 20.872.620 15.00
04 970-TX/04 10.872.621 970-TX-DS/04 20.872.621 20.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.