140-A-SMD

PCB Connector for SMD

Screw connection, with mounting peg

https://wecoconnectors.com/wp-content/uploads/Images/140-A-SMD-R.JPG

DESCRIPTION

The 2 to 8 pole terminal 140-A-SMD with a pitch of 5 mm has a screw connection with elevator clamping system and is equipped with M3 captive screws. The wire clamp and soldering tag are manufactured as a single unit and permanently engaged in the housing. The solder pins are exactly aligned parallel to the printed circuit board in order to create a coplanar connection after the reflow soldering process. The moulding is made of heat resistant thermoplastic material and equipped with plastic pegs on both sides to prevent twisting. This article is only available in bar magazines or in Tape-on-Reel. When delivered in Tape-on-Reel, this product is equipped with a Pick Discs that can be easily removed after the soldering process.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 8

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 6 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

200 V

320 V

500 V

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 16 A

Soldering Process: Reflow solder

Rated insulation voltage: 250 V acc. to EN 60998-1

Torque: 0.5 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 [1] 300 B, D 30 - 14 0.51
15 300 B 30 - 14 0.51
Download PDF

TECHNICAL DRAWINGS

140-A-SMD.JPG - technical drawing 1
https://wecoconnectors.com/wp-content/uploads/Images/140-A-SMD-LPL.JPG - technical drawing 1

MATERIALS

Moulding: PA HT, black, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1

Terminal body: Nickle plated brass

Pressure clamp: Tin plated tin bronze

Screw: M3; zinc plated steel, blue passivated

Solder pin: 0,5 x 0,9 mm; tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,00 [2]
  • Version without anti-twist peg or with other fastening flanges

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 140-A-SMD/02| 10.801.602 10.00
03 140-A-SMD/03 10.801.603 15.00
04 140-A-SMD/04 10.801.604 20.00
05 140-A-SMD/05 10.801.605 25.00
06 140-A-SMD/06 10.801.606 30.00
07 140-A-SMD/07 10.801.607 35.00
08 140-A-SMD/08 10.801.608 40.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.