360-K
DESCRIPTION
The 2-pin Flat screw terminals of the 360-K series each consist of a ceramic base with grooved flat terminals attached to the base. The grooves allow easy connection without special preparation of the conductors. To fasten the strip in the application, the versions 360-K and 360-KF have two screw holes, which are located in the middle between the two external grooved flat clamps. The 360-KF version is also fitted with spring washers and washers. These flat terminal strips are among the heavy versions.
GENERAL INFORMATION
Pitch: 24.00 mm
No. of poles: 2
TECHNICAL DATA
Clamping Range:
0.5 - 6 mm² / 0.5 - 2.5 mm² / 20 - 14 AWG [1][2]
Rated cross section: without cable lug
Wire stripping length: 11.5 mm ± 1 mm
Rated current: 41 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Torque: 2.0 Nm
Other specifications: Terminal strips must not be strung together without considering the clearance and creepage distances. Rated values apply to use in combination with insulated substrates.
TECHNICAL DRAWINGS
MATERIALS
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 250°C
Screw: M5; M3; Zinc plated steel
Washer: Zinc plated steel
Spring Washer: Zinc plated stee
Screw Terminal: Nickel plated brass
OPTIONS / ACCESSORIES
- Versions only with washers
STANDARD CONFIGURATIONS
| Poles | Items | Part # | Length L [mm] | Step | 3D PDF |
|---|
