360-K

https://wecoconnectors.com/wp-content/uploads/Images/360-K-R.JPG

DESCRIPTION

The 2-pin Flat screw terminals of the 360-K series each consist of a ceramic base with grooved flat terminals attached to the base. The grooves allow easy connection without special preparation of the conductors. To fasten the strip in the application, the versions 360-K and 360-KF have two screw holes, which are located in the middle between the two external grooved flat clamps. The 360-KF version is also fitted with spring washers and washers. These flat terminal strips are among the heavy versions.

GENERAL INFORMATION

Pitch: 24.00 mm

No. of poles: 2

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.5 - 6 mm² / 0.5 - 2.5 mm² / 20 - 14 AWG [1][2]

Rated cross section: without cable lug

Wire stripping length: 11.5 mm ± 1 mm

Rated current: 41 A

Rated insulation voltage: 750 V acc. to EN 60998-1

Torque: 2.0 Nm

Other specifications: Terminal strips must not be strung together without considering the clearance and creepage distances. Rated values apply to use in combination with insulated substrates.

Download PDF

TECHNICAL DRAWINGS

360-K.JPG - technical drawing 1

MATERIALS

Comparative tracking index: CTI ≥ 600

Temperature range: -40°C up to 250°C

Screw: M5; M3; Zinc plated steel

Washer: Zinc plated steel

Spring Washer: Zinc plated stee

Screw Terminal: Nickel plated brass

OPTIONS / ACCESSORIES

  • Versions only with washers

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.